The C5 Series SMD Placement Machines

Four different models to cover a vast range of SMT manufacturing requirements. All models are built on the same platform with the rugged construction you have come to expect from Contact Systems.

The C5 is the ideal Pick and Place machine for medium volume manufacturers, especially those with frequent job changeovers. Its high feeder capacity and fail-safe feeder mounting system gives you the option to load one job while another is running. Operating features that are built into the C5 make it one of the most productive machines in its price range.

 

See Single Beam SMT Placement Machine C5-192

See Single Beam SMT Placement Machine C5d-256

C5 Series Specifications

 

Model Designator

 

The C5 Series Base Configurations

      Flexible SMT Placement Machine. Price / Performance Leader

 

C5-128 Pick and Place Machine

  • 128 x 8-mm Feeders
  • 9,400 to 14,200 CPH
  • Up To 22 Matrix Trays
  • 4 or 8-Spindle Heads
  • FlexiFix Board Mounting System or The Board
  • Conveyor with optional Auto-Rail Adjust

 

 

 

more about C5-128

C5-192      Single Beam SMT Placement Machine.Versatility without Compromise
C5-192 Pick and Place Machine
  • 192 x 8-mm Feeders
  • 9,400 to 14,200 CPH
  • Up To 17 Matrix Trays
  • 4 or 8-Spindle Heads
  • FlexiFix Board Mounting System or The Board
  • Conveyor with optional Auto-Rail Adjust

 

 

 

more about C5-192

C5d-128      Dual Beam SMT Placement Machine. Fast and Flexible
C5d-128 Pick and Place Machine
  • 128 x 8-mm Feeders
  • 22,500 CPH
  • Up To 30 Matrix Trays
  • Two 8-Spindle Heads
  • Auto Centering Board Conveyor

 

 

 

 

more about C5d-128

C5d-256       Dual Beam SMT Placement Machine. The Ultimate Single Machine Solution
C5d-256 Pick and Place Machine
  • 256 x 8-mm Feeders
  • 22,500 CPH
  • Up To 30 Matrix Trays
  • Two 8-Spindle Heads
  • Auto Centering Board Conveyor

 

 

 

 

more about C5d-256

The C5 Series SMD Placement Machines Specifications

Model
C5-128
C5-192
C5d-128
c5d-256
Feeder Capacity
128
192
128
256
Matrix Tray Capacity
4,7,19,22
2,3,17
1, 2, 15, 16, 30
Number of Heads
1
2
Number of Spindles
4 or 8
8
Placement Rate, CPH, IPC 9850 (1608C component)

9,400 (4 Spindle)

14,200 (8 Spindles)

22,500
Component Range
 
Smallest
0.25mm X 0.5mm (0.01" X 0.02")
Largest
Square 50mm X 50mm (1.97" X 1.97 ") / Rectangle 26mm X 68mm (1.02" X 2.68")
Maximum Height
15mm (0.59"), taller on request
Minimum Lead / Ball Size Diameter (micro BGA)
0.3mm / 12mil
Placement Accuracy
 
Chip
± 65μ / 3 sigma
QFP
± 40μ / 3 sigma
Board Conveyor
 
Minimum Rail Width
55mm (2.2")
Maximum Board Size
400mm x 460mm (15.7" x 18.1")
W / Large Board Option
610mm x 460mm (24" x 18.1"), larger on request
Maximum Board Thickness
8mm (0.315") clearance ( i.e. 6mm thickness + 2mm warp)
Clearance below PCB
40mm (1.57")
Edge Clearance for Conveyor
4mm (0.157")
Conveyor Type
Single stage; left to right, or right to left travel direction (configurable), fixed front rail or fixed rear rail (programmable)
Conveyor Height
952.5 ±12.5 mm (SMEMA)
Nozzle Changer
Two nozzle banks (one for each head) 12 nozzles, standard; 30 maximum for each bank
X\Y Axis Motors & Measuring System
Linear motors and touchless linear encoders with 5μ resolution
Z Axis Motors
DC Servo Motors (8 per head) with 18μ resolution
Rotation (Theta) Motors
DC Servo Motors with .005 degree resolution
Alignment Method
100% Fly by vision alignment with full lead/ball inspection
Camera Type
CCD
Lens Type
Telecentric
Lighting
 
Standard
Strobe backlighting
Optional
Strobe frontlighting for bottom leaded devices, i.e. BGA's/micro BGA's
Facility Requirements
 
Depth
2,520mm (99.21")
3120 mm(122.8")
Width (With Feeders)
1,670mm (65.75")
Height (With Status Light)
1,850mm (72,83")
Weight (Without Feeders)
1725 kg / 3800 lb
1815 kg / 4000 lb.
2040 kg / 4500 lb
Electrical Connection
208 V, 3 phase 50/60 hz / 25 amps
Compressed Air Supply
6 Bar (85 psi), 10 cfm clean, dry, oil free, filtered 2 mm
Environment
15 - 25°C, 50 - 70% relative humidity
Models
C5-128
C5-192
C5d-128
C5d-256